|
|
|
Benefits
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Advanced communication | |
| Real Time Historical Trending | |
| Boiler setup and tuning is display driven fill-in-the-blanks operation | |
| Available in 5.7" and 10.4" screen size | |
| NEMA 4X front panel eliminates the need for protective viewing doors |
The Touch Screen Operator Terminal Model OIT can be easily integrated with PCC-III and DCS-III Controllers to enable intuitive commissioning without the use of Laptop or PCC-III Controller faceplate.

Advanced communication
| |||||||||||
| Real Time Historical Trending standard, optioanl Flash Card allows historical data to be exported to MS Excel | |||||||||||
| Scalable objects enables accurate process displays | |||||||||||
| X/Y Plots for intuitive Fuel/Air Curves display and commissioning | |||||||||||
| Boiler setup and tuning is display dirve fill-in-the-blanks operation | |||||||||||
| Easy to use OIT_Edit Configuration software | |||||||||||
| Available in 5.7" and 10.4" screen size | |||||||||||
| NEMA 4X front panel eliminates the need for protective viewing door |
Mechanical |
|
| Enclosure Size: Enclosure Type: Weight: |
OIT6 = 7” H x 8.83” W x 2.3 “D OIT10 = 9.5” H x 12.83” W x 2.2 “D Nema 4x/IP66, (indoor use only), aluminum front plate OIT6 = 3lbs OIT10 = 5.53 lbs |
Environmental |
|
| Operating Temp: Storage Temp Humidity Limits: |
0 to 50°C -20 to 70°C 80% maximum relative humidity (non-condensing) from 0 to 50°C |
Electrical |
|
| Input Power: External Power Supply: Battery: |
+24 VDC ±20% @ 33 W maximum 120 Vac / 24 VDC Lithium coin cell. Typical lifetime of 10 years |
Software |
|
| Application Software: | OIT_Edit (Windows based) |
Communications |
|
| Ethernet Port: Protocols: RS422/485 Port: Protocols: RS232 Ports: Protocols: USB Port: |
10 BASE-T / 100 BASE-TX, RJ45 jack connection Web enabled Modbus TCP/IP Master, TCP/IP Slave, Encapsulated Modbus Master Allen Bradley DF1 Master OPC Consult factory for other available protocols (1) standard, (1) Optional, up to 115,200 baud, RJ45 jack connection Modbus Universal Master, ASCII Slave, RTU Monitor, RTU Slave Danfoss VLT 6000 Allen Bradley DF1 Master, DH485 Master Siemens S7 via MPI Adapter, S7 via PPI, Simovert via USS, TI-500 Series Consult factory for other available protocols (2) Serial ports, up to 115,200 baud. RJ12 jack connection Modbus Universal Master, ASCII Slave, RTU Monitor, RTU Slave Danfoss VLT 6000 Consult factory for other available protocols USB Port: Programming, Type B connection |
OIT6 Display |
|
| Description: Size: Resolution: Backlight: Real-time Clock: Application Memory: Keypad: Expanded Memory Card: |
256 colors QVGA, CSTN Display, 5.7 inch 320 x 240 pixel LCD Field Replaceable Battery-backed clock time stamps critical data 4 MB on-board flash 4 button, membrane switches with tactile feedback Optional 512 MB memory card, application, historical, alarm & event storage |
OIT10 Display |
|
| Description: Size: Resolution: Backlight: Real-time Clock: Application Memory: Expanded Memory Card: Keypad: |
256 TFT Color VGA, 10.4 inch 640 x 480 pixel Field Replaceable Battery-backed clock time stamps critical data 8 MB on-board flash Optional 512 MB memory card, application, historical, alarm & event storage 8 button, membrane switches with tactile feedback |
Touch Screen |
|
| Description: Touch Cells: |
Resistive Analog Free formable to fit target shape |
Historical Data |
|
| Description: Chart Span: |
Up to 8 traces (pen) charts, Same chart used for real
time and historical data 30 seconds to 12 hours |
LED Indication |
|
| Red LED (top): Yellow LED (middle): Green LED (bottom): |
Labeled “PWR” Flashing: Unit is in the boot loader, no valid configuration is loaded Steady: Unit is powered and running an application Off: No Expanded Memory Card is present Steady: Valid Expanded Memory Card present Flashing Rapidly: Expanded Memory Card being checked Flickering: Unit is writing to Expanded Memory Card Flashing Slowly: Incorrectly formatted Expanded Memory Card Flashing: A tag is in alarm state Steady: No alarms present |
Default Password Setup |
|
| User “GUEST”: User “OPERATOR”: User “TECHNICIAN”: User “ADMIN”: |
No password, user can only view Default Password = “Oper”, user can only adjust boiler operation values, tuning and setup values are blocked Default Password = “Tech”, user has access to operation and tuning values Default Password = “Admin”, user has access to operation and tuning values |
Certifications and Compliances |
|
| Safety: Enclosure: |
UL50, IEC 1010-1, EN 61010-1: Safety requirements for
electrical equipment for measurement, control, and laboratory use,
Part 1. IP66 Enclosure rating (indoor use), IEC 529, Type 4X Enclosure rating (indoor use only) |
| Description | Catalog Number |
|---|---|
| 5.7" Operator Interface Terminal Color Touch Screen with Pre-Configured operation and commissioning displays | OIT6 |
| 10.4" Operator Interface Terminal Color Touch Screen with Pre-Configured operation and commissioning displays` | OIT10 |
| Optional Accessories | Catalog Number |
| Historical Memory 512 MB Compact Flash Card for extended historical memory collection and export to MS Excel | 90283 |
| Communication Expansion Card, provides (1) additional RS-232 and RS0485 Ports | 90284 |
| OIT_Editm, Operator Interface Terminal Configuration Software | OIT-EDIT |
|